Dome dishwasher, manufactured by COMENDA (Italy) model LC 700, is designed to automate the dishwashing process and meet the requirements sanitary standards at food establishments. Used for washing glasses, cutlery, plates and trays in baskets measuring 500x500 mm. This machine is recommended for use in enterprises Catering, processing from 750 to 1250 plates and other serving items per hour. It is easy to use and can wash up to 40 baskets per hour (about 850 plates). The device is usually mounted between two tables: used dishes are stored on one of them, clean dishes are stored on the other. (the table area for used dishes should be 50 percent larger than the table area for clean ones). The LC 700 dishwasher has a simple electromechanical control panel and three wash cycles: glass and lightly soiled items (1st cycle 90 seconds); standard contaminated items (2nd cycle 120 seconds); heavily soiled objects (3rd cycle 180 seconds). Operation starts automatically when the canopy is lowered and stops immediately when it is opened during a cycle; this automatically resets the state. The soft start function provides additional protection when washing glass and fragile dishes and increases the reliability of the pump. The automatic self-cleaning cycle keeps the device internally clean and avoids the risk of bacteria spreading. Inside the COMENDA dishwasher there is a deep, seamless tank with rounded corners with a capacity of 42 liters, the design of which prevents the accumulation of dirt in welds and bends. To control the drainage and prevent the tank from overfilling, an anti-return valve is used. The valve is protected by a filter with holes and removable waste baskets. The water pressure during the washing process is supported by a 0.75 kW pump. The heating element (heating element) in the dishwasher tank keeps the water hot at 55-65°C. Its power is 2 kW. The 8.2 liter boiler ensures ideal cleaning performance by maintaining the water temperature at 80 - 90°C during the rinsing phase. The power of the heating element (heating element) in the boiler is 6 kW. An efficient rinse system that uses only 4 liters of clean hot water per cycle, resulting in low operating costs (energy, water, chemicals). There is no cold rinse program (for bar glass). An optional modification with the RCD (rinse control device) system is possible - maintaining a constant rinsing temperature at 85°C even with low water pressure in the main line. The system includes an atmospheric boiler and a rinsing pump. CRC - heat exchange and condensation device (for economical consumption of water, electricity and detergents).
Thermostats (in accordance with HACCP requirements) control the water temperature during the washing and rinsing process and prevent the start of the working cycle when the water is not sufficiently heated. The dishwasher dome is single-layer, without heat and sound insulation, and is equipped with a safety system against sudden closure in the event of a spring break, which helps avoid injury to the operator. There is no automatic lifting of the canopy at the end of the cycle. The clearance height (loading window) is 440 mm, which also allows you to wash trays. The body, tank, rocker arms, filters, guides and legs are made of AISI 304 stainless steel, which meets all standards and hygiene standards for professional equipment. The boiler is made of high-quality AISI 304 stainless steel, which increases protection against the negative effects of chlorinated water. The rocker arms are located above and below the basket, they are removable and interchangeable. They have nozzles for spraying and disinfection during washing cycles. The filter and waste baskets are easily accessible for cleaning and replacement. The LC 700 dome dishwasher is connected to a cold water supply. For high-quality operation of the device, the following water supply requirements must be met: recommended temperature – 10-15°C; pressure – minimum 500 kPa; hardness – 7-14 °F. The diameter of the connection to the water supply is 3/4", the drain hole with a diameter of 50 mm. If the height of the connected sewage system is higher than the drain pipe, it is possible to install a drain pump (optional). A rinse aid dispenser is included as standard. Additionally, a detergent dispenser can be installed (optional It is also possible to order and purchase baskets corresponding to different types of dishes (for cups, cutlery, trays), demineralization filters, external water softeners and other COMENDA accessories.
The standard equipment of the machine also includes cassettes:
2 pcs cassettes for plates P18/12 660312 (12 pcs soup plates or 18 pcs flat plates)
1 piece cutlery container G 660503
The LC 700 dishwasher has a floor-standing design and the following overall dimensions (mm): 625 (width), 760 (depth), 1460 (height) and weighs 130 kg. The support system is provided by 4 adjustable stainless steel legs. The device has a total power of 6.75 kW and operates from a network with a voltage of 380 V and a frequency of 50 Hz. In accordance with European standards, the noise intensity does not exceed 70 dB. The COMENDA LC 700 dome dishwasher is a model with good performance and low energy and water costs. Simplicity in maintenance and management does not require special training of operating personnel. It is perfect for restaurants and large cafes with seating for up to 100 people. This machine allows you to wash not only tableware and cutlery, but also trays. To fully complete the washing department, it is recommended to equip this dishwasher with additional COMENDA work tables for collecting and pre-rinsing dirty dishes, as well as for unloading and drying clean dishes.
OUT OF PRODUCTION, ANALOGUE PC07, 625x760x1460, 380V, 6.75 kW, 40/30/20/8 cassette/hour, dome, cassettes 500x500
Package Included
Removable stand holder
Vacuum valve;
Thermostop;
One-piece bathtub;
Additional options:
You can see other dome dishwashers in our catalog.">
The COMENDA LC 700 dome-type dishwasher is the best-selling dishwasher equipment. It is possible to equip the machine with tables for pre-cleaning dishes and unloading tables, which will turn dishwashing into a dynamic and labor-intensive process, and its productivity will be high level. There is the possibility of corner installation of such solutions.
Package Included
Body, washing and rinsing sleeves made of AISI 304 stainless steel;
Legs adjustable in height;
Electronic control panel in C series washing machine models
Removable stand holder
External hose to the washing chamber;
Manual or automatic cycle start;
Pressed tank with rounded corners;
Vacuum valve;
Thermostop;
One-piece bathtub;
Anti-return valve in LC series washing machines (Comenda LC 700, Comenda LC 900)
Additional options:
The RCD function in the control device maintains a constant water temperature of 85 ° C during rinsing, even in the event of low water pressure;
The CRC, a unit mounted on top of the machine, condenses the steam coming out of the machine and the resulting heated water is fed back into the machine. This saves energy;
You can see other dome dishwashers in our catalog.
By supplying dome dishwashers for kitchens, restaurants, cafes, canteens and any catering establishments, the online store “Restaurant Kit” creates all the conditions for the convenience of customers. By purchasing a dishwasher COMENDA LC 700, you get a quality product at the best price of RUB 186,805. with the possibility of delivering equipment throughout Russia, including Moscow and the Moscow region, free consultation from our specialists.
Transport costs and customer waiting time are reduced to a minimum! You can pick up the goods by pickup from the company’s own warehouses or from the warehouse of a regional dealer without waiting for delivery from Moscow and paying for transportation.
Comenda- a dynamic Italian manufacturer, remains one of the world's most important suppliers of industrial dishwashing equipment for more than 40 years.
The main philosophy of the company is high quality equipment, ergonomics, reliability in everything, innovation and modern solutions at an affordable price. The manufacturer offers a wide range of dishwashing equipment, available to consumers of any level - from small cafes, restaurants and canteens to serious equipment for washing facilities in universities, hospitals and other catering establishments. We offer a full range of industrial dishwashers: from undercounter, front-mounted and dome machines to sophisticated integrated conveyor washing systems with significant performance.
Comenda dishwashing equipment is particularly reliable, regardless of the type of equipment - be it washing glasses, plates, trays, kitchen utensils, pots of any size.
Frontal glass washers, dome type washers, cassette conveyor type with continuous loading, a full range of dishwashing accessories that complete the washing room - loading and unloading tables, solutions for sorting dishes - all this confirms that the Italian manufacturer Comenda is the ideal partner for every professional production catering or public catering enterprises.
1. GENERAL INFORMATION
The leading Italian manufacturer of washing machines has been present on the dishwashing equipment market for more than 40 years. It has representative offices in several countries around the world.
Introduction of the latest technologies, modern design, Special attention to environmental protection, improvement design features, ergonomics and functionality, optimization of the washing process, support of hygienic standards - Comenda washing machines meet all these requirements.
2. INDUSTRIAL DISHWASHING EQUIPMENT
Comenda dishwashers are an example of the ideal combination of price and quality. In a wide range of equipment, you can choose the optimal solution for organizing the washing process both for large objects (canteens, restaurants, factory kitchens) and for small ones (cafes, bars, snack bars). An individual approach to each client and high standards of reliability allow Comenda to occupy a leading position in the market since 1963.
2.1. Intermittent dishwashers
Loading and unloading of dishes in machines of this type occurs manually. The operator places the cassette with dishes into the dishwasher chamber and, after closing the door, starts the washing process. Batch dishwashing equipment is characterized by low productivity and is installed in the washing rooms of small catering establishments.
Especially for such customers, the Comenda factory has developed the Prime Line - these are universal and easy-to-use dishwashers that combine an effective and economical solution for customers. The line includes under-counter glass and dishwashers of the PB and PF series, as well as dome PC machines.
Front-type dishwashers
Dishwashers with front loading They have compact sizes, which allows them to be installed in limited spaces - under a countertop or bar counter.
Models of the PB and PF series are equipped with the new DIGITAL control panel with an intuitive display that shows the current temperature of the wash and rinse cycle. The panel is located at the top of the machine, which protects it from possible water ingress. The START button is color-coded for operator convenience.
Dishwashers range Prime Line equipped with innovative washing and rinsing arms with a patented system WRIS®2+, and are also capable of operating in a variety of power supply modes.
MAIN ADVANTAGES OF THE SERIES:
| * Electronic control panel DIGITAL | *Adjustable leg height |
| * Case material – brushed stainless steel AISI 304 | * Limit microswitch on doors |
| * Automatic temperature and cycle time adjustment system | * Automatic tank filling system |
| * WRIS®2+ washing system and new hose configuration | * Continuous water level monitoring system |
| * Built-in rinse dispenser | * Built-in heating system |
| * Possibility to install a detergent dispenser | * Anti-noise filter |
| * The tank is made using deep drawing technology and is equipped with a filter | * Thermostat |
Comenda glass washing machines are an ideal solution for bars and small cafeterias. The body of the machine has an ergonomic design, and the door is equipped with a convenient handle, which, when opened, triggers an automatic switch that stops the washing cycle.
The PB series machines are equipped with a spacious washing chamber that can accommodate tall glasses, tea saucers and cutlery. The drain point and microfilter of the pump are located in an accessible area - this simplifies their daily maintenance. A check valve prevents backflow and water from returning to the water supply. All machine components undergo appropriate testing and quality control, which guarantees high operating efficiency.
Note:.
Dishwashers of the PF series are the most versatile; they are suitable for placement in small cafes and gas stations.
On the control panel, the operator can select one of four washing programs: ECO (short cycle), for glasses, for plates, 
intensive cycle. In addition, it is possible to increase the wash cycle time and temperature.
To solve problems associated with pressure drops in the water supply network, PF series dishwashers can be equipped with a rinse control device. Thanks to the RCD (Rinse control device) system, the rinsing temperature is maintained at 85C, even with low water pressure in the line. (option)
Note:
Comenda dome-type machines are the best-selling dishwashing equipment for canteens! The PC line models provide four standard programs that are ideal for establishments in the middle segment of public catering. The first ECO program is a short cycle, the second is for washing glasses, the third is for plates and cutlery, the fourth intensive washing program is for heavy soiling.
On the control panel, you can select the washing mode - automatic (the cycle begins immediately after the dome is closed) and manual (the cycle will not begin until the operator presses the “start” button). The height of the chamber (440 mm) allows you to place cutlery and dishes of any shape and size.
The condition of the machine is easily monitored and controlled - the washing and rinsing temperature is displayed on the control panel. The automatic thermostat stops heating the rinse water when it reaches 85°C. In addition, the machine is equipped with a self-diagnosis program that displays errors on the display if they occur.
PC series dishwashers are equipped with new WRIS®2 washing and rinsing arms, which, when rotated, create a double water blade, which increases the contact time with the dishes and allows you to achieve an impeccable washing result. Thanks to the new design and geometry of the spray arms, the most efficient distribution of water is achieved and a reduction in water consumption by 25% compared to the previous configuration.
The possibility of equipping a dome-type machine with tables for pre-cleaning dishes and unloading tables will turn dishwashing into a dynamic and labor-intensive process with high productivity. For small rooms, it is possible to install the machine in a corner.
| Model | Dimensions, cm | Voltage, V | power, kWt | Performance, Cassettes/plates/hour |
Note |
|---|---|---|---|---|---|
|
Dishwasher COMENDA PC07 |
62.4x74x146 | 400/3/50 | 7,7 | 40 cassettes/hour - 720 plates/hour | GDCT |
|
Dishwasher COMENDA PC09 AVAILABILITY IN STOCK - there are many |
62.4x74x146 | 400/3/50 | 10,1 | 48 cassettes/hour - 864 plates/hour | GDCT |
|
Dishwasher COMENDA PC12 |
62.4x74x146 | 400/3/50 | 10,5 | 65 cassettes/hour - 1170 plates/hour | GDCT |
Note: Washable - G=glasses, D=plates; C=cutlery; T=trays; P=pans; U=kitchen utensils; GN=gastronomy container; B=cassettes
Boiler washing machines
Compact boiler washing machines of the GE series are designed for washing boilers, gastronorm containers and other kitchen utensils. Purchasing this type of industrial dishwasher will greatly facilitate work in the kitchen of a restaurant or school canteen and will provide decent results for washing large dishes.
All models in the series are made of stainless steel, protected by double-layer casing and equipped with electronic control panels. The operator can choose whether the machine should start the wash cycle after closing the dome door or wait until the start button is pressed.
The design of the washing arms, equipped with a self-cleaning system, as well as powerful pumps will ensure excellent results regardless of which of the four standard washing programs has been set. The machine is also equipped with a double filtration system and a steam exhaust.
Some GE series models are supplied with a rinse control device (RCD), which serves to pump rinse water out of the boiler using a blower and then spray it, thus making the machine completely independent of water pressure.
In addition, the series includes two heavy-duty models (GE655RCD and GE1155RCD), which also feature stainless steel pumps that can clean even the most stubborn dirt.
The GE series front loading machines are very easy to use, efficient and compact. Every part of the machine has been designed to simplify and speed up the operator's work. Double doors, equipped with a counterbalance spring, are easy to open and allow for quick cleaning of the inside of the machines.
The Comenda model range includes boiler washing machines with different dimensions:
- GE 50RCD with 550x660 mm cassettes
- GE 605RCD and GE 655RCD with 650x700 mm cassettes
- GE 805RCD with 810x700 mm cassettes
- GE 1005RCD and GE 1155RCD with 1320x700 mm cassettes
Versions with a washing area height of up to 800 mm are also available
| Model | Machine type | Dimensions, cm | Voltage, V | power, kWt | Performance | Note |
|---|---|---|---|---|---|---|
|
Boiler washing machine COMENDA GE 605E RCD with dispensers |
Boiler washer | 83x90x193 | 400/3/50 | 14,0 | P.U.G. | |
|
Boiler washing machine COMENDA GE 805E RCD |
Boiler washer | 81x70x65 | 400/3/50 | 14,0 | 2/4/6/10 minutes (wash cycle) | P.U.G. |
|
Boiler washing machine COMENDA GFS 90 |
Boiler washer | 62x74.2x149.5 | 220/3/50 | 6,0 | 2/4/6/10 minutes (wash cycle) | P.U.G. |
Note: Washable - G=glasses, D=plates; C=cutlery; T=trays; P=pans; U=kitchen utensils; GN=gastronomy container; B=cassettes
Possibility to change voltage on request
2.2. Industrial continuous dishwashers
This equipment is installed in food service washrooms where there is a need to continuously load large quantities of dirty dishes.
Options for loading dishes into cassettes with a preliminary stage of cleaning them and unloading them onto tables (AC series) or loading dishes directly onto the machine conveyor if they are relatively uniform in type and size (N series). Powerful and reliable conveyor-type dishwashers are installed in restaurants, hotels, sanatoriums, school canteens and manufacturing enterprises, confectionery and meat production. Moreover, the possibility of corner solutions for arranging loading and unloading rotary tables makes it possible to install conveyor-type washing machines in even small rooms.
Tunnel type cassette dishwashers - AC series
AC2
Series AC2 includes the latest models of compact dishwashers, manufactured in accordance with the philosophy of respecting the environment, tying together high efficiency of the equipment, as well as its minimal impact on people and nature, with a sharp reduction in operating costs. The AC2 series tunnel dishwasher allows you to minimize the consumption of energy, water and detergents.
Dishwashers AC2 extremely efficient - their productivity reaches up to 148 cassettes per hour. The operator can decide for himself in which direction the dishes should move, because the arrangement of the modules and the direction of movement of the conveyor belt can be organized depending on the customer's requirements.
Tunnel series dishwasher AC2E is the result of 50 years of scientific research and perfectly combines stylish design and high efficiency. It is suitable for use in any catering establishments, and its productivity reaches 220 cassettes per hour.
Tunnel series dishwasher AC2E has the advantage of a modular design. Each machine consists of several modules that can be used depending on the needs of the client and the space available to him. The machine can be assembled in the form of a continuous chain consisting of a pre-wash zone, a main wash zone, a rinsing and drying zone, or in the form of separate units. This ensures optimal use of the available space and simplifies the operation of the machine as much as possible. Another innovation used in the AC2E series models is the Eco2rinse system, the module with which is installed separately from the washing area. The system minimizes the amount of water required to rinse dishes, thereby reducing the customer's operating costs.
Another advantage of Comenda machines is the convenient location of the pumps, the suction pipes of which are located at the lowest point of the tank, thus increasing their efficiency and reducing the estimated level of energy consumption. In addition, the fact that the pumps themselves are located outside the tank guarantees compliance with sanitary and hygienic standards, since with this equipment design, the accumulation of dirt in hard-to-reach places is excluded.
FEATURES OF COMENDA EQUIPMENT.
 |
Door inner surface smooth and even, all its parts easy to clean. |
 |
Reservoir and pump-out filters pumps are made of stainless steel become. |
| Sprinkler nozzles are equipped protective visors for prevent water from draining upon termination of its supply. The washing area itself is equipped inspection hatch. |
 |
Rounded corners of the tank prevent the accumulation of dirt. The structure is also equipped self-cleaning pump. |
 |
 |
Due to the thickness of the doors dishwasher, noise and thermal insulation is extremely effective. |
 |
Stoppers are built into metal conveyor guides and serve to protect the operator dishwasher. |
| ECO2rinse system installed in a separate module that has inspection hatch and inaccessible for soapy water based washing areas. The module also can be equipped with a system rinsing control. |
 |
Special gasket structure promotes automatic cleaning during closing process and opening the door. |
 |
Technical characteristics of dishwashers
As part of the ECO2 project, Comenda has introduced a number of technological innovations into the configuration of its dishwashers to significantly reduce the consumption of resources such as energy, water and detergents.
DIGIT ELECTRONIC CONTROL PANEL
All AC2 series models are equipped with DIGIT electronic control panels. The controls are extremely easy to use and the display will show the dishwasher operator all the information they need.
RINSE WATER SUPPLY CONTROL DEVICE
Rinsing begins only when a cassette with dishes enters the zone. This allows you to save huge amounts of water.
HEAT RECOVERY SYSTEM
This system allows the machine to work exclusively on cold water, heating it to a temperature of 45-50°C. This uses steam and heat that would otherwise be released into the atmosphere. The condenser, in turn, turns the steam into condensate and cools the outgoing air stream. Energy savings range from 9 to 17 kW/hour, depending on the model.
AUTOMATIC TIMER
Turns off the pumps when there are no cassettes with dishes. Resumes operation when new cassettes are supplied.
ECORINSE SYSTEM (ECOLOGICAL RINSE)
Water from the final rinse zone is drained into a reservoir with a dual filtration system and then sent to the pre-rinse module. The system allows you to save a certain amount of electricity and water.
MIDWASH PLUS FUNCTION
Unlike conventional dishwashers, here only 50% of the water from the rinsing zone is directed to the washing zone. The second half falls into the pre-wash area. Thus, the water in the pre-wash zone is purified and contains less detergent. The advantages of this configuration are obvious: savings on detergent, less harm to the environment, and a significant reduction in operating costs.
* Systems APRS, RAH, PRS, MWP, Automatic timer are ordered separately and are not included in the standard equipment of the machine.
SPECIFICATIONS
| AC2 Series | AC2/AC2A | AC2E/AC2AE | AC2P/AC2AP | AC2PE/AC2APE |
|---|---|---|---|---|
| Cassettes per hour at a processing speed of 1 cassette per 2 minutes, according to DIN10510 | 70 | 90 | 100 | 120 |
| Maximum productivity, cassettes per hour | 100 | 120 | 150 | 180 |
| 1150/1250 | 1550/1650 | 1650/1750 | 2050/2150 | |
| 80 | 94 | 125 | 139 | |
| 150/220 | 150/200 | 215/320 | 215/320 | |
| Voltage, in volts | 400V 3N 50Hz | 400V 3N 50Hz | 400V 3N 50Hz | 400V 3N 50Hz |
| 19,11 | 21,76 | 23,86 | 26,46 |
Index A indicates the angular configuration of the machine.
The index P denotes a configuration with a pre-wash module.
The index E indicates the configuration with the ECORINSE module (environmentally friendly rinsing).
AC3 series conveyor type dishwashers.
The AC3 series tunnel dishwasher confirms the principles of Comenda's environmental policy, combining high efficiency and minimal impact on the environment. Each machine consists of several modules that can be installed in series, in a line, or in a corner of the room, depending on the customer's requirements and the space available to him. Thus, the Comenda tunnel dishwasher allows you to optimize the operating area and provide any customer with an individual solution.
THE INNOVATIVE MULTIRINSE SYSTEM ALLOWS YOU TO KEEP RESOURCE CONSUMPTION TO A MINIMUM
This development, patented by Comenda, allows you to use only 100 liters of water per hour, since the washing process is organized in such a way that after the active rinsing zone there is a zone in which liquid drains from the dishes. This way, when dishes reach the final rinse module, there is much less detergent on them, reducing the amount of resources used for rinsing by 50%. The advanced washing system has another important advantage. Thanks to the location of the suction point at the bottom of the tank, the efficiency of the pump increases, which ensures high machine performance and low energy consumption. Compliance with sanitary and hygienic standards is ensured by locating the pumps outside the tank, since in this case the accumulation of dirt in the washing area is eliminated.
The exceptional effectiveness of Comenda's new development, the MULTIRINSE multiple rinsing system, has been confirmed during the operation of dishwashers equipped with this system, in particular, conveyor models of the AC3 series. The main operating principle of the system is to clean dishes from detergent at the first rinse stage. Thus, in the final rinsing zone, essentially polishing of already clean dishes occurs at high temperature. The MULTIRINSE system guarantees excellent results even when using 0.5 liters of water per cassette with dishes, which means 50% water savings compared to machines from other companies operating with similar volumes. In addition to significant water savings, the machines reduce energy consumption and the use of detergent and rinse aid. The MULTIRINSE system reduces operating costs to unprecedented levels!
CONTROL PANEL DIGIT + HPS EASY |
All AC3 series models are equipped with DIGIT electronic control panels. The controls are extremely easy to use and the display will show the dishwasher operator all the information they need. In addition, the machines can be equipped with HPS Easy interfaces.
HPS EASY SYSTEM
This modular system allows you to know the energy consumption, water consumption during rinsing, and also display messages on the LCD display about any malfunctions. In addition to the display, the system includes 2 buttons. The HPS Easy display typically displays the following information: “machine on”, “machine ready” and “machine running”. If malfunctions occur and recur, the system displays messages about them and records data about them.
WASH AREA
The system improves pump efficiency because the suction point is located at the very bottom of the tank. Thus, in this case, high efficiency and economical energy consumption are guaranteed. The pump, as well as all outlet pipes, are located outside the tank, which prevents the accumulation of dirt inside it. In addition, the pumping system is installed on anti-vibration supports, and water is pumped through rubber hoses - all this helps reduce noise and prevents the transmission of vibration to the structure.
The new hydraulic design allows the pump to be positioned lower than in traditional dishwashers, at the same level of efficiency and flow rate. Thus, the performance of the pump itself remained at the same level.
ARC TRIPLE EFFECT DRYING SYSTEM WITH INTEGRATED HEAT RECOVERY UNIT
The new drying system allows the hot and cold air flows generated during the process to be reused.
When dehumidifying the air, the recovery unit removes hot and humid air through a channel next to the condenser bank, in which cold water flows in the opposite direction. In this case, moist air condenses inside the battery, and cold water cools the warm air and heats it up before being supplied to the main zone. This allows significant energy savings to be achieved.
In addition, the location of the heat recovery unit (between the Multirinse and drying module) increases the efficiency of the process.
When drying dishes, an evaporator is used to remove moisture from the dishes.
Blowing hot, dry air saves on energy used during drying. The drying unit fan increases the air temperature and reduces its humidity level. The ARC system allows you to find a balance between the amount of air that is processed by the recovery unit, as well as the air that is supplied to the fan. This allows you to significantly reduce the amount of warm air that comes out of the car.
THERMAL SYSTEMS WP.
Heat pumps, which are equipped with conveyor-type dishwashers, allow you to save up to 40% of the energy spent on heating water. An additional benefit of the system is its ability to effectively remove the heat generated by the pumps without harming the environment. Cooled and dry air is the optimal heat dissipation product for the atmosphere, designed in accordance with VDI 2052.
WASTE DISPOSAL AND RESOURCE RECYCLING WHEN USING A PRE-WASHING MODULE
PRE-WASHING ZONES P5, P6 AND DHM AND DOUBLE FILTRATION SYSTEM BY COMENDA.
This machine configuration allows you to reduce the amount of dirty water produced at the outlet to a minimum, as well as reuse waste water from the rinsing zone.
Waste collected during the pre-wash process is collected in a cartridge filter, which can be removed and cleaned even while the machine is running without stopping it. A second filter located directly above the pre-wash tank prevents dirt from returning back into the tank.
The third filter is located on the pump.
MIDWASH PLUS SYSTEM
For models in this series, as well as for AC2, the MIDWASH PLUS option is possible.
SPECIFICATIONS
| AC3 Series | AC3-20 | AC3-25 | AC3-30 | AC3-32 | AC3-35 | AC3-40 |
|---|---|---|---|---|---|---|
| Cassettes per hour at a processing speed of 1 cassette in 2 minutes, according to DIN10510 (speed II) |
120 | 155 | 175 | 190 | 210 | 230 |
| Maximum productivity, cassettes per hour (speed III) | 160 | 200 | 225 | 250 | 275 | 300 |
| Performance at speed I (intensive washing) | 110 | 140 | 155 | 165 | 190 | 205 |
| Standard machine length, mm | 2000 | 2600 | 2900 | 3200 | 3500 | 3800 |
| Tank capacity, in liters | 94 | 134 | 174 | 214 | 254 | 254 |
| Water consumption during rinsing (with PRS / without PRS), l/h | 54/80 | 70/100 | 80/115 | 85/130 | 95/142 | 104/155 |
| Voltage, in volts | 400V 3N 50Hz | 400V 3N 50Hz | 400V 3N 50Hz | 400V 3N 50Hz | 400V 3N 50Hz | 400V 3N 50Hz |
| Installed power (at water temperature 55°C), in kW | 25,74 | 27,6 | 28,98 | 39,46 | 39,84 | 41.22 |
| Energy consumption, kW/h | 18,02 | 19,32 | 20,29 | 27,62 | 27,89 | 28,85 |
SOFTWARE AND INTERNET WORK.
Modern technologies make it possible to achieve efficiency technical support client to a whole new level. The tools included in the AC3 Series allow customer-side technicians to interact with our service centers in real time and quickly get answers to their questions.
The software, designed to run on Android and Apple, can be installed on any smartphone. The application allows you to access the Comenda website from a tablet computer and phone in order to view catalogs, instruction manuals, drawings, and also place orders for spare parts.
BARCODE
Each dishwasher has a unique identification barcode, which allows you to access technical documentation related to this device, as well as place an electronic order for spare parts
Conveyor belt dishwashers
Conveyor type dishwashers series NE1 - NE2 - NE3- these are improved models of dishwashers in which dishes are loaded directly onto the belt. Conveyor-type dishwashers are typically installed in hospitals, hotels, canteens, airport catering systems and other facilities with large quantities of similar dishes.
Models in these series are suitable for washing large food containers and different types of dishes. All conveyor-type models are distinguished by their particular ergonomics and modern design.
NE1 line models- compact and simple dishwashers, ideal for areas with limited space and guarantee excellent washing results for large workloads - up to 4500 plates/hour, as well as maximum process hygiene in a short cycle time.
NE2 line models- are the ideal solution if you are looking for a machine with high performance that can adapt to different washing requirements and working speeds. The machines are available in various configurations and sizes, from the simplest - with washing chamber dimensions from 620x430mm(H), to XL models with dimensions 820x430mm(H), and can wash up to 9000 plates/hour.
NE3 line models- equipped with the exclusive patented Multirinse® system, which minimizes the consumption of water, electricity, detergent and rinse aid. The innovative technology of the NE3 line of dishwashers automatically selects conveyor speed depending on the workload, and reduces operating costs to a minimum.
| Model | Machine length including zone drying, mm |
Total power, kW: | Performance, plates/hour: |
Water consumption liters/hour: |
Tank volume, liters: |
Note | ||
|---|---|---|---|---|---|---|---|---|
| when connecting to cold water |
during installation recuperator |
when connecting to warm water |
||||||
| NE1 | 4200 | 56,3 | 44,4 | 41,3 | 1550DIN/2093 | 220/340 | 110 | DCTGN |
| NE1-P6 | 4800 | 65,8 | 50,9 | 46,8 | 2150DIN/2903 | 290/440 | 170 | DCTGN |
| NE21-P6 | 5400 | 60,2 | 52,3 | 49,2 | 2475/2750DIN/3850 | 147/147/220 | 184 | DCTGN |
| NE21-P9 | 5700 | 63,9 | 54,5 | 51,4 | 2745/3050DIN/4270 | 163/163/245 | 204 | DCTGN |
| NE21-P12 | 6000 | 66,4 | 55,5 | 52,4 | 3015/3350DIN/4690 | 180/180/270 | 224 | DCTGN |
| NE22-P9 | 6600 | 79,1 | 67,2 | 62,6 | 3555/3950DIN/5530 | 213/213/320 | 299 | DCTGN |
| NE22-P12 | 6900 | 81,1 | 68,2 | 64,1 | 3825/4250DIN/5950 | 230/230/345 | 319 | DCTGN |
| NE31-P6 | 6200 | 54,4 | 49,8 | 47,7 | 2745/3050DIN/4118 | 92/92/137 | 198 | DCTGN |
| NE31-P9 | 6500 | 57,4 | 51,5 | 49,4 | 3015/3350DIN/4523 | 101/101/151 | 218 | DCTGN |
| NE31-P12 | 6800 | 58,4 | 52,5 | 50,4 | 3285/3650DIN/4928 | 110/110/164 | 238 | DCTGN |
| NE32-P9 | 7400 | 67,4 | 60,7 | 57,6 | 3825/4250DIN/5738 | 128/128/191 | 308 | DCTGN |
| NE32-P12 | 7700 | 69,4 | 61,7 | 59,2 | 4095/4550DIN/6143 | 137/137/205 | 328 | DCTGN |
| NE33-P12 | 8600 | 83,4 | 74,9 | 71,8 | 4905/5450DIN/7358 | 164/164/245 | 428 | DCTGN |
Note: Washable - G=glasses, D=plates; C=cutlery; T=trays; P=pans; U=kitchen utensils; GN=gastronomy container; B=cassettes
- The standard machine has a conveyor belt width of 620mm and an entrance window height of 430mm.
- The XL configuration machine has a conveyor belt width of 830mm and an entrance window height of 430mm.
- When installing a heat pump or recuperator, the total electricity consumption will increase.
- Drying tunnels have different lengths and, in combination with heat pumps and recuperators, will help create an individual design solution for each client.
- It is possible to connect the machine to both warm and cold water (optional).
- It is possible to supplement the machines with conveyors of various configurations.
- APRS - RAH - AUTOTIMER (standard option for some models) - with the help of these accessories it is possible to significantly reduce operating costs in terms of electricity and water consumption.
- The DHM module (available for all models) improves cleaning results during intensive work, reducing tank regeneration time.
2.3. Machines for washing glasses for watching 3D films
A new line of washing machines has been developed for cleaning glasses in cinemas. Innovative technology has been developed to wash and sterilize glasses after each viewing of 3D films so that used glasses again meet all hygienic and sanitary standards.
New models of 3D glasses washing machines are distinguished by a short but complete washing cycle, provide complete sanitary cleaning, and are easy to operate.
- Up to 36 pairs of 3D glasses can be loaded into one cassette
- full cycle - 90 seconds
- 3 main treatment cycles: wash cycle, sanitizing, light drying
- 3 models of machines of the new line: dome type, frontal, compact model with built-in washing tub
8 reasons to trust us:
- Only high quality and famous brands
- All equipment has certificates
- We take full responsibility for the warranty
- We'll refund your money or exchange the item, no questions asked.
- Own service department and spare parts warehouse
- A full-time technologist and designer will help you make right choice
- Full-time couriers and own freight transport in Moscow, St. Petersburg, Samara and Tolyatti
- We ship to Russian regions only by reliable transport companies, the cargo is necessarily insured
Unlike many online stores, the Restaurant Service company has its own service center and spare parts warehouse. This allows us to quickly resolve warranty issues and more.
Extensive experience, constant practice, training and certification at factories are the basis of our professionalism.
Only people who love our common cause take root in our team.
About the service center
We are not an online store in the usual sense. First of all, we are an Engineering company.
Our staff consists of food industry technologists, designers and engineers of various specializations.
The main activity is design and comprehensive equipment of catering facilities.
And we develop the online store, as a structural division, in accordance with all the rules and standards of e-commerce.
Description and technical specifications
Dishwasher LC 700 production COMENDA (Italy) designed for washing dishes, cutlery, glasses, cups, trays and pots in various catering establishments.
Frames, panels and internal tubes and legs are made of AISI 304 stainless steel, which ensures maximum service life under the most severe conditions. Washing and rinsing sleeves are made of stainless steel. Sprinkler nozzles are designed to prevent clogging. The condition of the machine is easily monitored and controlled.
Options:
Loading type - dome;
Basket size - 500x500 mm;
Productivity – 40/30/20 cassettes/hour;
Cycle duration – 90/120/180/480 seconds;
Tank volume – 42 liters;
Boiler volume – 8.2 liters.
This model has four standard washing programs:
For washing glasses,
For plates and cutlery,
For kitchen utensils,
For heavy soiling.
The height of the chamber is 440 mm, allowing you to place cutlery and dishes of any shape and size.
Peculiarities:
Manual or automatic cycle start;
Deep seamless tank with rounded corners;
Thermostop function;
Anti-vacuum valve;
Built-in rinse aid dispenser;
The filter and waste baskets are easily accessible for cleaning and replacement.
To fully equip the washing department, it is recommended to equip the dishwasher with additional work tables for collecting and pre-cleaning dirty dishes, as well as for unloading and drying clean dishes.